How to install the faucet and how to install the faucet

Although the tap is small, it cannot be separated from it. The structure of the faucet seems to be extremely simple, but to install the faucet seamlessly, it is still necessary for the next effort. So, how to install the faucet ? Here we will take a look at the faucet installation methods and precautions, hoping to help everyone.

How to Install Faucet Installation Method

Firstly, prepare the installation tool and check whether the supporting parts are complete before installation. The common leading spare parts include: hoses, rubber gaskets, showers, water removal, kidnappers, and decorative caps.

1, single hole basin faucet installation

When buying single-handle basin faucet, you should pay attention to the outlet diameter. Now most of the market is a hard-tube inlet, so you should pay attention to the height of the reserved inlet, the most appropriate from the basin downward 35 points. When installing, it must be equipped with a special angle valve, and the angle valve must be fixed with the hot and cold water pipes of the wall outlet. When you find a distance between the angle valve and the faucet hose, buy a special extension tube to connect. Remember, do not use other pipes to connect, because if the water pressure is high, it is easy to fall off, leak, and cause losses to you. If the inlet pipe is longer than the outlet pipe, you can cut it off according to your needs. If the angle is not appropriate, you can bend it to your desired position. Remember: Do not bend hard to 90 degrees or more than 90 degrees. When installing the basin to remove water, do not forget to purchase the faucet's small connector (short for the faucet). Don't forget to flush the water pipe buried in the wall before you install it.

2. Installation of Shower and Bathtub Faucet (wall-mounted)

When you have purchased showers, bathtubs, wall taps, you can choose the appropriate height to bury the water pipe. Hot and cold water pipes must be spaced 15 cm apart. Before installation, you must not forget to flush the water pipe to avoid excessive water quality and damage the mixer.

Concealed shower, Bath Faucet: After purchasing a concealed faucet, it is generally necessary to embed the valve plug of the faucet in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the valve plug cannot be embedded. The plastic protection cover of the valve plug should not be easily removed when it is embedded, so as to prevent the cement and other chores from damaging the valve plug when it is embedded. In addition, when embedding the valve core, it should also pay attention to the direction of the valve core up and down, left and right, so as not to miss the valve core. Wall mounted faucets are pre-installed into the water pipe with dimensional deviations that can be adjusted using the available adjustments.

3, the installation of thermostatic faucet

Before installing the thermostat, please check whether the water pipe is hot or cold. Remember not to connect the hot and cold water pipes incorrectly to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostats because the water pressure is too low. Do not forget to install the hot and cold water filter when installing the thermostat.

4, single hole Kitchen Faucet installation

The requirement is stable, because the kitchen mixer is used frequently, and it is easy to loosen and move it. Therefore, the lock nut must be tightened. At present, there are some faucets on the market that use nuts to fasten the nuts. This kind of stability is very good. If you can solve the problems of removing water, it will be a popular trend in the future.

Faucet installation notes

1. Before installing the faucet, firstly put in water, wash the sediment impurities in the water pipe, remove the debris in the installation hole, and check the accessories in the packing box do not break into the impurities so as not to clog or wear the ceramic valve core.

2, use metal hose to connect the water pipe, do not need to consider the installation location of the water pipe, but it should be noted that the length of the hose is usually 30cm (inlet size, individual brand or hard pipe), use metal pipe to connect the water pipe, After the faucet is bought, the pipe should be laid according to the length of the faucet. Of course, from the perspective of service life, the pipe should be better than the hose. Similarly, when the faucet is installed, if the pipe is laid above the sink, It is best to install in-wall sink faucets, and vice versa.

3, the relevant requirements of imported faucets are different from domestic faucets. The inlet pipe of the general inlet faucet has soft and hard points, and the largest number of hoses (stainless steel braided pipe) is available. The movable nut end has an inch size of 3/8 inch. Only the imported triangle valve can be matched with the matching nut. The nozzle is 11/4 inches.

4, when taking over, the left is hot water, the right is cold water, the two tubes are 100mm-200mm apart. After the water inlet joint is fixed, remove the faucet. After the wall screed is completed, install the faucet to prevent the faucet from being worn or scratched. If you use imported products such as showers, booster pumps are pre-installed to ensure proper water discharge.

The above is a brief introduction to how to install the faucet , and I hope to help you. For more information, please visit this website. Stay tuned.

Faucet hot and cold faucet